24V 5 Piece Combo Kit with Hammer Drill, Impact Driver, Grinder,Circular Saw, Rotary Hammer, Charger and 2 x 5.0Ah batteries
Conquer the jobsite with this five-piece kit that combines the FLEX 13mm 158Nm 2-Speed Hammer Drill Driver with Turbo Mode, 203Nm 1/4" Hex Impact Driver, 125mm Side-Switch Variable-Speed Angle Grinder and 184mm Circular Saw, & 26mm SDS Plus Rotary Hammer. Each FLEX tool MAXIMISES power and efficiency with 24V cross-compatibility and powerful, sensor-free brushless motors, all powered with the FLEX Advantage, using the same FLEX 24V batteries with unrivaled power, runtime, and fast charging. Includes two FLEX 24V 5.0Ah Batteries and 280W Rapid Charger. Read More
Features
FLEX 24V POWER
5 Tools, 2 Batteries, 1 Charger
FXA1271T-Z - 13mm 2-SPEED HAMMER DRILL WITH TURBO MODE
158Nm Torque - 2,500 RPM - 40,000 IPM
FXA1351-Z - 1/4" HEX IMPACT DRIVER
203Nm of Torque - 3,400 RPM - 4,000 IPM
FXA3181A-Z - 125MM VARIABLE SPEED ANGLE GRINDER
Side Switch, 4-speeds, up to 10,000RPM
FXA2141-Z - 184MM CIRCULAR SAW
5,800RPM, 66MM Depth of cut at 90 degrees
FXA1551A-Z - 26MM SDS PLUS ROTARY HAMMER
2.6J IMPACT ENERGY, 980 RPM, 4,350 BPM
FXA0421-Z - 280W RAPID CHARGER
Fully Charges 5.0Ah battery in only 30 minutes
FXA0121-1 - (2) 5.0Ah LITHIUM-ION BATTERY
960W Power Output, 120Wh Capacity
THE FLEX ADVANTAGE
20% more power with 24V lithium, 25% longer runtime with THERMA-TECH™ heat management, up to 50% faster charging with high-power, dual fan chargers
SENSOR-FREE BRUSHLESS MOTOR
Every FLEX 24V tool is built around an intelligent digital brushless motor designed to eliminate friction and optimised for higher efficiency and power.
FLEX 24V CROSS-COMPATIBILITY
Compatible with all FLEX 24V batteries, chargers and tools.
END-TO-END 5 YEAR WARRANTY
Register your new products within 30 days and get a full 5-year warranty on your FLEX 24V tools, batteries and chargers
Description
Flex Support
Specs
- 13mm 2-Speed Hammer Drill with Turbo
- No-Load Speed: 0-550/0-2,000 RPM
- TURBO Speed: 0-700/0-2,500 RPM
- Impact Rate: 0-8,800/0-32,000 IPM
- TURBO Impact Rate: 0-11,200/0-40,000 IPM
- Max. Torque: 158 Nm
- Clutch Settings 24+D+H
- ¼" Hex Impact Driver
- No-Load Speed: 0-3,400 RPM
- Impact Rate: 0-4,000 IPM
- Max. Torque: 203 Nm
- Collet: 6.35m / ¼" Hex
- 125mm Variable Speed Angle Grinder
- Switch Type: Side Switch
- Speed Settings: 4
- No-Load Speed: 3,500/5,000/7,000/10,000 RPM
- 184mm Circular Saw
- No-Load Speed: 5,800 RPM
- Bevel Capacity: 0-56°
- Cut Capacity at 90°: 66 mm
- Cut Capacity at 45°: 48 mm
- 26mm SDS Plus Rotary Hammer
- No-Load Speed: 0-980 RPM
- Blows/Min: 0-4,350 BPM
- Max. Drilling Diameter: 26 mm (Concrete); 13 mm (Steel); 30 mm (Wood)
- Max. Impact Energy: 2.6 joules
- 24V 5.0Ah Lithium-Ion Battery
- Battery Power: 960W
- Battery Energy: 120Wh
- Battery Weight: 1 kg
- 24V 280W Rapid Charger
- Charging Current: 9.4A
- Input Voltage & Frequency: 240V, 50Hz
- 24V 2.5Ah Lithium-Ion Battery Charge Time: 30 Mins
- 24V 5.0Ah Lithium-Ion Battery Charge Time: 30 Mins
- 24V 8.0Ah Lithium-Ion Battery Charge Time: 50 Mins
- 24V 12.0Ah Lithium-Ion Battery Charge Time: 75 Mins
You Might Also Like the
24V 6 Piece Combo Kit with Hammer Drill, Impact Driver, Grinder,Circular Saw, Rotary Hammer, Recip Saw, Charger and 2 x 5.0Ah batteries
Stacked, loaded and ready to go. This six piece combo kit combines the powerful cutting capabilities of the FLEX 7-1/4" Circular Saw and Reciprocating Saw with the torqued-out 1/2" 2-Speed Hammer Drill and 1/4" Hex Impact Driver.
