Features
Ergonomically designed, handy grip cover with soft grip insert ensures a secure grip and good guidance
Brushless motor with greater efficiency and a longer service life
Electronics: Speed preselection with 4 settings, constant speed control by means of tachogenerator, soft start, restart protection
Sanding speed suitable for the material thanks to electronic speed adjustment
Hook & loop backing pad with 12-hole system for optimum extraction, suitable for all standard abrasives
E-signal switch for simple, safe operation with quick-stop function prevents trailing of the backing pad
Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required
Effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge
External dust extraction Ø 27 mm, antistatic suction hose SH 27×3,5m AS (445.045) can be connected
Impact-resistant filter cartridge with exchangeable PES filter allows simple dust disposal or cleaning of the filter as well as maximum service life
Especially suitable for overhead work
Description
Lightweight, compact one-handed orbital sander, very ergonomic and low-vibration thanks to special balancing for fatigue-free and joint-friendly work
Flex Support
Specs
- Power consumption: 260 W
- Voltage: 230 V
- Frequency: 50/60 Hz
- Stroke: 2.0 mm
- Backing pad length: 130 mm
- Backing pad width: 80 mm
- Orbit rate, no load: 16000 – 24000 rpm
- No-load speed: 8000 – 12000 rpm
- Diameter dust extraction connection: Ø 27
- Cable length: 4.0 m
- Dimensions (WxLxH): 163 x 90 x 121 mm
- Weight: 1.2 kg
